styrofoam tiles for ceiling pros and cons stages gluing

Budget upgrade Good Bye Popcorn Ceiling | DIY
reklam

reklam

Foam tiles on the ceiling make it soberly change the interior of the apartment means the budget to update the situation, even perform the installation of the ceiling in force even a non-specialist. Panels of foam are very light so it can work a person with them. They are moisture, which allows their use for finishing in all rooms, including kitchens, restrooms and bathrooms.

Colors, shapes and three-dimensional patterns on brick cover can create the look, they can mimic the coarse rustic plaster in rustic style, luxury and stucco in rococo style, and Kassuner antique style. Each request design can be met by using foamed tiles.

A necessary complement to such a roof erode-corrugated base, which closes joints and irregularities. If desired, they can be mounted LED strip for lighting. To foam did not light, after installing it, or water-based paint with acrylic paints.

For sale, the following types of foam tiles are:

Differ plates and forms. Most often, they are square with sides of 50 cm, but there are plates in the form of rectangles, diamonds, regular hexagons (Honeycomb). Also popular tiles, imitate shapes and colors of card rules.

The face plates can be smooth or have relief, smooth or padded film laminates. The film, as a painting, can simulate the texture of stone, fabric, plaster, wood, plaster or woodcut. Laminated tiles used in areas such as under the kitchen. For bathrooms and toilets are more suitable panel with waterproof properties.

The main advantage of such roofing coating – glue the roof tops from foam very easily, and deal with even an untrained person.

In addition, we note the following benefits:

WARNING! Foam tiles on the ceiling can change the physical properties (oplavitsya) under the influence of heat, so installing a powerful light nearby does not recommend it. It is best to use lamps, suspensions, and place them at least 20 cm from the surface of the plates. hot water temperature resistant plates without changing shape so that contact with the pipes, where there is heat, can do so.

The biggest disadvantage – imperviousness for steam flavor. If you cover foam tiles roofing the room, whose walls are covered with vinyl wallpaper, the room will rise to high humidity, which can lead to the appearance of the fungus.

Before you glue the tiles on the ceiling, it is necessary to decide – how much and what type of tile you need, what does the calculation, buy the amount required, and to prepare the surface of the roof of the plant.

To correctly calculate the number of plates required for repair, it is necessary to know the length and width of the room. Multiplying these numbers gives the ceiling, but buying a tray based on this number only is not necessary. As part of the plates can be damaged when cut to the same shape of the ceiling is not ideal, inevitable cost-overrun material. So be sure to consider stocks in an amount of not less than 15% of the total area.

On a paper, you must draw a plan in the room, while scaling. Then you need to keep the diagonal and place with maximum precision plates from the central part to the edges of the room.

For example, in a room the size of 2 × 3 meter roof is 6 square meters. To cover a square meter should be 4 plates standard size 50×50 cm. Thus, 24 plates need to glue all roof tiles and 2-3 as a reserve. All you need is to buy a 26-27 plates.

If the walls of the opening will be equal to at least 1/2 tiles, then tiles will cover a piece 2 such a period. If, on the other hand, the gap will be more than 1/2 of the plate, then it should be noted that the flow will go the whole tile.

You need:

Before you begin to work with tiles for the roof in foam, it is necessary to do the work surface preparation.

Before you glue the tiles on the roof of the foam, it is necessary to identify, as it will be located. This is done as follows: